Checkline NS-600 Manual do Utilizador descarregar pdf (Página 3)

page 3page 6

UNITS

FPM or HZ

MEMORY ICON

INDICATES IF

CURRENT FLASH

RATE IS ALREADY

STORED IN

MEMORY

LOW BATTERY

ICON

BATTERY COMPARTMENT

COIN SLOT

FLASH DURATION LEVEL

F0~F6 (F0 DEFAULT)

MEMORY LOCATIONS

1~9 FOR BOTH FPM AND HZ

PROGRAM MODE

Changing Units

Turn off the strobe. Press and hold the

MODE key, then press the POWER switch.

SEL is displayed. Press the or arrows

to select FPM or Hz. The selected unit

becomes the default when the strobe is

powered on. FPM is the default. Press the

POWER switch to exit.

Changing Flash Duration Default

F0 is the default, good for most applications.

To change, turn off the strobe. Press and

hold the

MODE key, then press the POWER

switch. SEL is displayed, then press the

▲ or ▼ arrows to select F0, F1, F2, ... F6.

The selected flash duration level becomes

the default when the strobe is powered on.

Press the

POWER switch to exit.

Clearing All Memory

Turn off the strobe. Press and hold the

MODE key, and then press the POWER

switch. SEL is displayed. Press and hold

MODE, then press MEMORY to display CLr.

Press

MEMORY again and stored memory is

cleared (CLr disappears after three

seconds). After memory is cleared the

strobe returns to measuring mode.

LOW BATTERY

When LOW BATT appears on the display,

turn off the strobe. Loosen the coin screw

in the back cover and replace all batteries

with the same brand and type. For best

performance always replace both batteries

together and use AA alkaline, NiMH or

NiCAD cells. Please note polarity. Memory

is retained even if the batteries are removed.

▲

▲

–SEL–

FPM

F0

–SEL–

FPM

F0

F0 F6

SELECT WITH UP AND DOWN ARROWS

SELECT WITH LEFT AND RIGHT ARROWS

–CL6–

FPM

F0

PRESS MEMORY TO CLEAR

3000.0

FPM

LOW BATT

F0

DISPLAY

LED INDICATOR

POWER SWITCH

●

CLICK AND RELEASE TO TURN ON,

CLICK TO TURN OFF. AUTO SHUT OFF

AFTER 10 MINUTES

●

CLICK AND HOLD, IF RELEASED AFTER

2 SECONDS, STROBE SHUTS OFF.

MEMORY KEY

MODE KEY

●

PHASE SHIFT

●

PROGRAMMING

1

2

3

7

UP/DOWN ARROW KEYS ▲ OR ▼

●

CHANGE FLASH RATE

●

CHANGE FLASH DURATION LEVEL

●

SELECT PROGRAM OPTIONS

X2/÷2 KEYS

●

DOUBLE OR HALVE THE FLASH RATE

LEFT/RIGHT ARROW KEYS OR

●

CHANGE PHASE SHIFT

●

SELECT PROGRAM OPTIONS

▲

▲

4

6

5

1 2 3 4

Comentários a estes Manuais

Sem comentários