
13
Parameter List
The following list summarizes the configuration parameters available for configuring each device
channel. When editing these values over RS-232 and/or USB, make sure to call the Save command to
commit the values. Otherwise, they will be reset if the Remote Display is powered down.
Important Note: While these parameters can be changed over RS-232 and USB, the preferred way to
edit these settings is by using the Channel Settings menu on the Android application. While the Android
tablet is connected to the Remote Display, writing to these parameters will be blocked (reading is still
allowed). If parameter writing over the external data connection is required, the Android tablet must be
disconnected first.
1 – Inches
2 – Millimeters
3 – Hidden
0 – Absolute (ABS)
1 – Total Indicated Runout (TIR)
2 – Incremental (INCR)
0 – Freeze
1 – Min
2 – Max
Enter value without decimal
Ex: 012345 = 0.12345
Enter value without decimal
Ex: 012345 = 0.12345
Enter value without decimal
Ex: 012345 = 0.12345
0 – Digimatic
1 – Encoder
Glass Type
(encoders only)
1 – Inches
2 – Millimeters
Base Multiplier
(one encoder tick)
5 – .5
10 – .
100 – 0.001mm
200 – 0.002mm
Enter value without decimal
Comentários a estes Manuais