Checkline HP-Textile-Durometer Manual do Utilizador descarregar pdf

-1-

TABLE OF CONTENTS

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.1 Unpacking

1.2 Complete Kit

2.0 Operating Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 Memory Pointer (optional)

3.0 Verifying Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3.1 Textile Durometers

3.2 Shore Durometers

4.0 Available Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6.0 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pressure on the spring-loaded outer ring which exceeds the

range of the instrument by more than 100% may cause permanent

damage to the measuring spring and must be avoided under any

circumstances.

This device must not be operated in explosion hazard areas and

must not come into contact with aggressive substances.

WARNING

-8-

Model: HPSO

Indentation Body: U-grooved 3/32"

Depth of Indentation: 0 - 2.5 mm

Test pressure*: approx. 12.5 N

Meas. spring force: 0.55 - 8.065 N

Display range: 0 –100 Shore hardness graduation marks

Scale diameter: 54 mm

Working face: 18 mm

Weight approx. 300 g net/ 500 g gross

Dimensions: 50 (L) x 50 (W) x 110mm (L)

*Pressure on test material surface when outer ring is in measuring position.

1 2 3 4 5 6

Resumo do Conteúdo

Página 1 - TABLE OF CONTENTS

-1-TABLE OF CONTENTS1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.1 Unpack

Página 2 - 1.0 INTRODUCTION

-7-*Pressure on test material surface when outer ring is in measuring position.5.0 SPECIFICATIONSModel: HP-2.5, HP-5, HP-10, HP-2.5F, HP -5F, HP-10FDe

Página 3 - 4.0 AVAILABLE MODELS

2.0 OPERATING PROCEDURES1. Place the instrument on the material to be tested. The durometer must be level, and the sensing pin must be perpendicular t

Página 4 - 3.0 VERIFYING CALIBRAION

-4-3.0 VERIFYING CALIBRAION3.1 Textile Models (HP-2.5, HP-2.5F, HP-5, HP-5F, HP-10, HP-10F)The Textile Durometers utilize a 0-100 units scale. The un

Página 5 - 6.0 WARRANTY

6.0 WARRANTYELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confir

Página 6 - TEXTILE DUROMETERS

HP SERIESTEXTILE DUROMETERSAND SHORE DUROMETERSOperating InstructionsCHECK•LINE®BY ELECTROMATICOI-503HPELECTROMATIC E Q U I P M E N T C O., I N C.600