Checkline R55 Manual do Utilizador descarregar pdf (Página 8)

Plug & Test

Smart Force & Torque Sensors User’s Guide

6 SERIES R03 FORCE SENSORS

6.1 Unpacking and Assembly

Carefully remove the sensor from the box. Extra care should be taken for very

low capacity models. No assembly is required.

6.2 Overview

Tension and compression force may be applied to the threaded holes in the load

cell shaft and opposite flat surface. Attachments may be threaded into these

holes. Finger-tighten only

. These holes also allow for mounting as required.

6.3 Specifications

Accuracy: ±0.15% of full scale

Safe overload: MR03-025 – MR03-2: 200% of full scale

MR03-5 – MR03-100: 150% of full scale

Operating temperature: 40ºF – 100ºF [5ºC – 38ºC]

Operating humidity: 96% max. (non-condensating)

Weight: 0.4 lb [0.2 kg]

6.4 Dimensions

(in[mm])

24.0 [610] RETRACTED LENGTH

#10-32 X2

0.16 [4.1]

2.50 [63.5]

0.31 [7.9]

Ø 0.44 [11.2]

2.06 [52.3]

1.83 [46.5]

0.81 [20.6]

6.5 Capacity x Resolution

Model

No.

With Model 7i / 5i Indicator With Model 3i Indicator

lbF ozF gF kgF N mN lbF gF kgF N

MR03-025 0.25 x 0.0001 4 x 0.002 100 x 0.05 - 1 x 0.0005 1000 x 0.5 0.25 x 0.0002 100 x 0.1 - 1 x 0.001

MR03-05 0.5 x 0.0002 8 x 0.005 250 x 0.1 - 2.5 x 0.001 2500 x 1 0.5 x 0.0005 250 x 0.2 - 2.5 x 0.002

MR03-2 2 x 0.001 32 x 0.02 1000 x 0.5 1 x 0.0005 10 x 0.005 - 2 x 0.002 - 1 x 0.001 10 x 0.01

MR03-5 5 x 0.002 80 x 0.05 2500 x 1 2.5 x 0.001 25 x 0.01 - 5 x 0.005 - 2.5 x 0.002 25 x 0.02

MR03-10 10 x 0.005 160 x 0.1 5000 x 2 5 x 0.002 50 x 0.02 - 10 x 0.01 - 5 x 0.005 50 x 0.05

MR03-20 20 x 0.01 320 x 0.2 10000 x 5 10 x 0.005 100 x 0.05 - 20 x 0.02 - 10 x 0.01 100 x 0.1

MR03-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - 50 x 0.05 - 25 x 0.02 250 x 0.2

MR03-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - 100 x 0.1 - 50 x 0.05 500 x 0.5

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Sem comentários

Checkline R55 Manual do Utilizador Página 8